12V 150ah Maintenance Free Gel Batteries with 3 Years Warranty (PTG150-12)
Gel series batteries are designed to meet the requirements of frequent cyclic and high temperature applications. Such as broadband, PVs etc through up-to-date gel technologies. Our gel batteries uses German origin high purity fumed silica to form sulfuric acid thixotropic Gel and fills to the batteries with vacuum to ensure the fully penetration of electrolyte through separators and plates pastes.
Battery Structure
♦ Our factory was Founded in 2008 , 2 million batteries annual production capacity
♦ Products including UPS battery /Solar Battery / Deep cycle battery /VRLA battery /Sealed Lead Acid battery /Emergency Battery /12v Battery /Backup battery /Sealed Battery /Emergency Light Battery /Valve Regulated Lead Acid battery /Storage battery /rechargeable battery /Uninterrupted power battery /EPS battery /wind battery /Communication System battery /Inverter battery
♦ Products are exported to more than 150 countries
♦ Products are certified by CE , and FCC, MSDS, ISO and SGS certification
♦ Mature and very well respected AGM and GEL technologies for valve-regulated lead-acid batteries ranging from 2Ah to 3000Ah
| Capacity 77°F(25ºC) |
20 hours rate(7.8A 10.8V) |
156Ah |
| 10 hours rate(15A 10.8V) |
150Ah |
| 5 hours rate(26.8A 10.5V) |
134Ah |
| 1 hour rate(106A 9.6V) |
106Ah |
| Internal Resistance |
Full charged battery 77°F(25ºC):3.8mΩ |
|
| Capacity affected by Temperature (10 hour rate) |
104°F(40ºC) |
102% |
| 77°F(25ºC) |
100% |
| 32°F(10ºC) |
85% |
| 5°F(-15ºC) |
65% |
| Self-Discharge 68°F(20ºC) |
Capacity after 3 month storage |
90% |
| Capacity after 6 month storage |
80% |
| Capacity after 12 month storage |
60% |
| Max discharge current77°F(25ºC):900A(5S) |
| Charge (Constant Voltage) |
Float:13.6 to 13.8V/77°F/(25ºC) |
| Cycle:14.4 to 14.7V/77°F/(25ºC) |
| Max Current:37.5A |
GEL battery Specific Features:
♦Rechargeable Gel Deep Cycle Battery
♦Gelled electrolyte made by mixing sulfuric acid with silica fume
♦The electrolyte is gel like ,immobile and does not leak ,enabling uniform reaction of each part of the plate .
♦High rate discharge performance due to tight assembly technology
♦Strong heat dissipation and wide operating temperature range
♦Avoid acid mist being separated out , environment friendliness
♦Efficient venting system release excessive gas automatically
Application:
1.Green energy systems (solar, wind, hydro, etc)
2.Solar power stations
3.UPS systems
4.Electricity power supply systems (EPS)
5.Telecom installations
6.boats or buoys
7.Signal station
8.Survey and Mapping system9/Emergency lighting
10.Traffic lights
11.Street lightening
Operation and maintenance manual
For maintenance free battery, it's free maintenance in the operation. But we can only use it in proper operation to keep the long lifetime of the battery,
(1) Battery Installation
Batteries should be installed possibly in a clean, cool, ventilated and dry place. The battery should be placed upright. Each terminal between the batteries is connected firmly.
(2) The ambient temperature
Ambient temperature is important factor for the battery operation. When the ambient temperature is too high, Battery plate corrosion will be increased, while absorbing more moisture; When the ambient temperature is too low, the battery will not be full charged. All this will affect the battery life. Therefore we suggest the working ambient temperature is around 25 º C.
(3) The charge and discharge current
Battery charge and discharge current usually uses the concept C, the actual value of C is related to the capacity of the battery. For example, a 100AH battery: 1C = 100A. Charging current is around0.1C; The charging current must not be bigger than 0.3C. Discharge current general requirements in0.05 ~ 3C range.
(4) Charging voltage
After the battery is full converted to float charging, the float voltage is around 13.0V. If the charging voltage is too high will cause the battery overcharge, otherwise the battery will not be full charged. Charging voltage is abnormal, it may be caused by the battery configuration error, or it may be caused bycontroller failure. Do not choose the controller with bad quality.
(5) The depth of discharge
Depth of discharge of the battery life is alsoa important factor for lifetime of battery, the deeper the battery discharge, the fewer the number of cycles, so battery should avoided from deep discharge.
(6) Regular maintenance
Battery should be regular checked in every period time after used, such as check its outlook, measuring the average voltage of each battery, etc.
Audited Supplier 
){kind=link}
){kind=link}